Haas Commercial: 700 Series

700 Series

FEATURES

  • 1-3/4"-Thick Polyurethane
  • 16.18 Calculated R-Value
  • 26-Gauge Galvanized Steel
  • Full Thermal Break
  • Available with Wind Load
  • 21 Color Options
  • Industry Leading Warranty
  • 10-Year Rust & Delamination
  • 6-Year Hardware
  • 3-Year Spring
  • 2" or 3" track
  • Double steel end stiles
  • Exhaust port
  • Cam safety device
  • Spring bumpers
  • Chain hoist
  • High cycle springs
  • High cycle rollers
  • Wind load rating
  • Glazing (windows)
  • Aluminum full view section
  • Pass door
  • Top header seal
  • Keyed lock

Built to Last

Haas 700 Series commercial insulated steel doors stand up to the elements, while dramatically decreasing exterior noise and enhancing the overall aesthetics of your building at the same time. The 1-3/4” thick 700 Series insulated steel doors help increase energy savings with polyurethane foam cores and are built to last.


700 Series Quick Reference Guide

Model Panel Door Thickness R-Value* Max Door Size End Stile Type Section Skins Color & Window Oprions
Width Height Inside Outside
710 1-3/4" (44.5mm) 16.18 18'-2" 16'-0" Extruded End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Flush
Woodgrain Steel
All Colors
except bi-directional wood grains
712 1-3/4" (44.5mm) 16.18 18'-2" 16'-0" Extruded End Cap 26 GA V-Groove
Woodgrain Steel
26 GA V-Grrove
Woodgrain Steel
All Colors
except bi-directional wood grains
714 1-3/4" (44.5mm) 16.18 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
26 GA Flush
Woodgrain Steel
All Colors
except bi-directional wood grains
716 1-3/4" (44.5mm) 16.18 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
26 GA V-Grrove
Woodgrain Steel
All Colors
except bi-directional wood grains
732 1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
20 GA
Smooth Steel
Polar White & Brown
733 1-3/4" (44.5mm) 16.18 38'-2" 32'-0" Steel 26 GA V-Groove
Woodgrain Steel
20 GA V-Groove
Smooth Steel
Polar White & Brown
732-20 1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Steel 20 GA V-Groove
Smooth Steel
20 GA
Smooth Steel
Polar White & Brown
733-20 1-3/4" (44.5mm) 16.18 38'-2" 32'-0" Steel 20 GA V-Groove
Smooth Steel
20 GA V-Groove
Smooth Steel
Polar White & Brown
750 1-3/4" (44.5mm) 16.18 38'-2" 32'-0" Steel 24 GA V-Groove
Stucco Aluminum
24 GA V-Groove
Stucco Aluminum
Trinar Polar White &
Trinar Almond
751 1-3/4" (44.5mm) 16.18 38'-2" 32'-0" Steel 24 GA V-Groove
Stucco Aluminum
24 Flush
Stucco Aluminum
Trinar Polar White &
Trinar Almond
760
772
782
1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ribbed Short Panel
Woodgrain Steel
All Colors
761
771
781
1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Recessed Short Panel
Woodgrain Steel
All Colors
763
773
1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Recessed Long Panel
Woodgrain Steel
All Colors
764
774
1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ribbed Long Panel
Woodgrain Steel
All Colors
770 1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Ranch Panel
Woodgrain Steel
All Colors
780 1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Raised Panel
Woodgrain Steel
All Colors
790 1-3/4" (44.5mm) 16.18 24'-2" 32'-0" Extrude End Cap 26 GA V-Groove
Woodgrain Steel
26 GA Sculptured Panel
Woodgrain Steel
All Colors

*calculated R-Value

Note: Certain weights and/or applications may limit the size allowed

Available Colors

All colors are not available in every model number. Refer to the chart above for color availability.

Colors are not exact due to the differences in monitors. Refer to samples at Diamond Door for exact color match. Call (800) 303-8762

Standard Colors


Polar White

Almond

Sahara Tan

Sandstone

Gray

Charcoal

Bronze

Brown

Hunter Green

Premium Colors

Trinar® colors carry a 35-year finish warranty, making them ideal for projects that require extra-long lasting durability and beauty. Cool Black includes a cool chemistry paint finish but is not recommended for projects with extreme exposures to heat and sunlight.


Trinar® White

Trinar® Beige

Trinar® Brown

Cool Black

Woodgrain Colors

The pre-painted wood grain finish is baked on to ensure a durable and long lasting door. Steel wood grain colors feature a 10 year finish warranty. Learn more.

Bi-Directional Woodgrains

A vertical wood grain pattern on the panel and stile contrasting with a horizontal pattern on the rails creates the appearance of a real wood door. Bi-directionals feature a light stucco embossment.


Ash

English Oak

American Walnut

Mahogany
Uni-Directional Woodgrains

These authentic colors feature a woodgrain pattern that runs horizontally to complement any of our insulated steel models. Uni-directionals feature a wood grain embossment.


Ash

English Oak

American Walnut

Mahogany

Decorative Hardware


Hinges Optional

Handles Standard

Technical Information

The Strength To Keep Out Noise and Weather

Haas commercial insulated doors stand up to the elements while dramatically decreasing exterior noise and enhancing the overall aesthetics of your building at the same time.

Choosing one of our insulated doors will help increase energy savings, as our CFC-free polyurethane provides one of the highest R-Values available in sectional doors. Haas garage doors are made from steel that contains 80% recycled material. They are reinforced with roll-formed galvanized steel struts and double-end hinges, as required to meet wind load specifications and to comply with ANSI/DASMA 102-2004. The protective coating system is found on both the interior and exterior steel.


CFC-Free Polyurethane Construction

The polyurethane foam in a Haas garage door section is fully enclosed inside the steel skins. This design puts the insulation properties of polyurethane foam far ahead of polystyrene foam for performance and value.

Polyurethane foam is a two-part system. It begins with two chemical blends that when mixed together expand and cure to fill the garage door panel. During the expansion, the foam completely fills the inside of the panel and becomes fully adhered to the steel skins of the garage door panel to form a composite structure that is of exceptional strength and rigidity. Polyurethane foams are very stable when encapsulated inside a garage door section. Insulating with polyurethane provides a superior product with higher insulation properties and a stronger unitized section.


Hard Working Hardware

The track is 2" or 3" galvanized steel, depending on door size, with bracket mount for wood jambs or continuous reverse mounting for steel jambs. For angle-mount track, door widths are 2" wider than the opening. Track rollers are 2" or 3" case-hardened inner and outer steel races with 10-ball pre-lubricated bearings.

Hinges, brackets and reinforcing struts are hot-dipped galvanized steel. Fasteners are placed for maximum corrosion resistance. Counterbalancing springs are torsion type, computer calibrated to match door load. This provides a 10,000-cycle life at the minimum; optional spring wires can achieve 25,000, 50,000 and 100,000 cycle requirements. Springs are wound from oil-tempered wire and mounted on a continuous cross header tube or solid shaft, as determined by torque load.


The E-Strut and Wind Load

The E-Strut is the next generation of strut dsign. Conceived, developed and manufactured by Haas Door, testing has proven the E-Strut to outperform traditional struts.

This patented design is used on all Haas Door products. The innovative E-Strut is intelligently designed to require half as many tek screws as u-bars and struts currently in use. This means less time attaching struts in the field for installers and a savings in labor expense for our dealers. E-Struts are available in 2", 3", 4" and 6" widths and come standard in a galvanized finish. The 4" and 6" sizes do not require hinge straps. Haas Door products are available in a wide range of design pressures for wind load requirements. Contact your local Haas Door dealer for more information about wind load requirements in your area.


Pass Door

Custom pass doors are available on the 2000 and 700 Series.


Full View

Optional full view sections provide maximum light and visibility with available insulated glazing.


Full Thermal Break

A full Thermal Break is used in the tongue-and-groove construction of all commercial insulated doors. This rigid vinyl extrusion seals the joints and minimizes metal-to-metal contact between door sections, which limits the transfer of temperature. This also provides optimum water and wind resistance.


Unique Paint System

All Haas steel garage doors include a three-tier, corrosion-resistant protective paint system with a polyurethane primer and durable polyester finish coat on the interior and exterior. Haas Door's paint thickness is one of the highest in the industry and many of the 700 Series doors are available in 21 colors.


Weather Seal

A full-length, one-piece heavy vinyl bottom weather seal prevents infiltration of air, rain, snow and debris. The seal reduces impact shocks when the door is closed against concrete flooring.